Axles and Springs
Do most folks change out the old axles and springs? I have repacked the wheel bearings on the Corvette but am wondering if that is enough. We plan on a 3000+ mile trip this summer and dont want any...
View ArticleRe: Axles and Springs
We check the bearings and look closely at the springs and shackles; no new axels. I did find a broken spring on the 61 Terry and we replaced both. VK
View ArticleRe: Axles and Springs
Hello Tim. Most people do not. In general, most old trailers didn't get a lot of road miles. Some did, but most did not. They tend to be rusty, and need attention, but usually are not in need of...
View ArticleRe: Axles and Springs
Well, count me as someone who did. I bought a 1960 Serro Scotty Rear Door. Had about 3" of clearance under its dropdown floor. This trailer will be a long - hauler - have a trip from MI to NM planned...
View ArticleRe: Axles and Springs
Rob Just went through your axle rehab and it was what I was looking for thank you for tall the info in that thread!
View ArticleRe: Axles and Springs
Tim, I was in wncol's boots. I had a Dexter axle that was fitted with warner brakes. The PO had gutted the brakes out of it, though, because Dexter doesn't make brake parts for it anymore. And the...
View ArticleRe: Axles and Springs
Anyone ever do a lift kit on their trailer for more clearance? Not even sure if I'm using the right word, but figured the meaning would get through. I live in Idaho and go camping where a little more...
View ArticleRe: Axles and Springs
Seagal wrote:Anyone ever do a lift kit on their trailer for more clearance? Not even sure if I'm using the right word, but figured the meaning would get through. I live in Idaho and go camping where a...
View ArticleRe: Axles and Springs
I went to a local metal supplier and had them cut me a couple chunks of 1-1/2" steel, drilled a 1/2" hole in one side to fit over the bolt head on the spring and threaded the other side for a cap...
View ArticleRe: Axles and Springs
Gary, Don't forget your axle flip too! You've added about 3" to your trailer height -- nice! B
View ArticleRe: Axles and Springs
bpmcgee wrote:Gary, Don't forget your axle flip too! You've added about 3" to your trailer height -- nice!I didn't actually flip my axle. It was always underslung and has holes in the top to receive...
View ArticleRe: Axles and Springs
Raising the suspension is an option. How you do it is a possible issue. Moving the axle from top of the spring to the bottom of the spring is "acceptable", and using the spacer blocks, is "good". My...
View ArticleRe: Axles and Springs
John, "flipping the axle" generally (or at least what _I_) means flipping it from one side of the springs to the other -- NOT rotating it 180 degrees.
View ArticleRe: Axles and Springs
I have been using a "very old spring shop" in Southern California. They are "old school" and very knowledgeable. One thing that I was told by this spring shop recently was the steel metalology used in...
View ArticleRe: Axles and Springs
bpmcgee wrote:John, "flipping the axle" generally (or at least what _I_) means flipping it from one side of the springs to the other -- NOT rotating it 180 degrees. Exactly correct! 180 degrees will...
View ArticleRe: Axles and Springs
Moving the spring to the other side of the axle still requires drilling another hole in the axle for the spring bolt, right? It would have been required for my axle. -Gary
View ArticleRe: Axles and Springs
Gary that depends on your axle. My tubular axle just has big U-bolts fastening it to the springs. I would have just flipped the bolts over and fastened them in the other way. B
View ArticleRe: Axles and Springs
bpmcgee wrote:Gary that depends on your axle. My tubular axle just has big U-bolts fastening it to the springs. I would have just flipped the bolts over and fastened them in the other way. B...
View ArticleRe: Axles and Springs
bpmcgee wrote:Gary that depends on your axle. My tubular axle just has big U-bolts fastening it to the springs. I would have just flipped the bolts over and fastened them in the other way.B Maybe?...
View ArticleRe: Axles and Springs
John, Yes I do. I was rounding down because the complication didn't really answer his question :) B
View Article
More Pages to Explore .....